For up to date information on installation, adhesives, maintenance and certification call 01278 727727 or email info@dalhaus.co.uk.
Please note:
Colour variation
Because we make all our products to order, it is essential that all the material required for each installation is ordered in one batch to avoid variation in colour. If you order more than one Dalhaus product in the same colour, for example DalRollo and DalWerk, due to batch manufacturing it is not possible to obtain an exact colour match between the two products. The necessary stripping and sealing process will further change the appearance of the rubber.
DalRollo Satin Roll size
10m x 1.9m. Available in full rolls only
Thickness
3mm as standard normally kept in stock. Other thicknesses available upon request subject to minimum order requirements. Please contact us for further information.
Delivery quantities
For these products Dalhaus reserves the right to deliver excess material up to a maximum of +5% for orders up to 1000 m2 and +2% for orders over 1000 m2. These excess quantities will be fully invoiced. We also reserve the right to ship shorter rolls to make up the full quantity of the order. These shorter rolls will not exceed 10% of the total order. For exact quantities and sizes a 10% surcharge will be applied.
DalLastic
Tile size
500mm x 500mm DalLastic tiles, except Polygrass, are supplied with bevelled edges and are available in half tile 500mm x 250mm. Tiles are UV stabilised, 100% recycled rubber fibre bound with coloured polyurethane resin in natural earthy tones that blend with the environment.
Thickness
30mm - 100mm depending on fall height requirements.
DalZone and DalOmni
Roll size/Thickness
1250mm wide, all thicknesses. Roll length varies by product thickness as follows:
| Thickness | Roll length |
| 4mm | 30 metres |
| 6mm | 20 metres |
| 8mm | 15 metres |
| Available in full rolls only. | |
Thickness
DalZone
4mm, 6mm, 8mm (other thicknesses available on special order)
DalOmni
4mm (other thicknesses available on special order)
Splitting lines
Splitting lines are a natural feature of this product and will always occur.
Standards and certification
For up to date information email info@dalhaus.co.uk
DalChoc
Roll size/Thickness
1500mm wide, all thicknesses. Roll length varies by product thickness as follows:
| Thickness | Roll length |
| 4mm | 30 metres |
| 5mm | 24 metres |
| 6mm | 20 metres |
| 8mm | 15 metres |
| 10mm | 12 metres |
| 12mm | 10 metres |
| Available in full rolls only. | |
Thickness
Standard 15% density available in 4, 5, 6, 8, 10, 12mm thickness. Non standard densities available in 6mm (other thicknesses available on special order).
Splitting lines
Splitting lines are a natural feature of this product and will always occur.
Delivery quantities: DalZone, Dal Omni, DalChoc
Dalhaus reserves the right to ship shorter rolls to make up the full quantity of the order. These shorter rolls will not exceed 10% of the total order.
DalWerk
Tile Size
Classic available in 500x500 x 2.65mm and 1000x1000x4mm tiles.
Strata available in 500x500x3.5mm and 1000x1000x3.5mm.
Riven available in 500x500x3.5mm and 1000x1000x3.5mm
Rib
Rib available in 1000x1000x5mm.
Rib Full
Tile size
1000 x 1000mm. Rib tiles appear divided into two with a central line - see full tile image, right.
Sportlock
Tile size
970mm x 970mm inside to outside interlock tab.
Thickness
8mm standard.
|
Technical
Slip resistance |
Colour reproduction
Colour variation
Colour Fastness Fading and appearance variations can occur for many reasons, eg. incorrect cleaning and maintenance procedures, strong sunlight, chemicals and wear etc. Dalhaus manufacture an extra UV stabilised (EUVS) quality which is available on request. Please contact us for more information.
|
|
|
Special colours For those products where special colours are available, Dalhaus will achieve the best possible colour match bearing in mind that colours may vary between different materials, and that colour appearance will vary based on lighting conditions and angle of view. |